What the sources actually say
The Flowseal zapret-discord-youtube build ships a set of strategy BAT files plus a service.bat manager. The klaymm practical guide describes service.bat as a menu with options to run built-in tests, remove the service, and install the service with a chosen strategy number. Installing the service is how the guide suggests making a tested strategy persistent.
In interactive mode, you double-click a strategy BAT, a console window opens, and the winws.exe bypass process runs while that window stays open. The guide explicitly warns that when testing strategies manually, you should close the previous BAT window before starting the next one, so only one instance is active at a time.
In service mode, service.bat registers the chosen strategy as a Windows service named zapret, so winws.exe starts with the system and runs in the background without an open console. Real status output shows the two layers are tracked separately: in Issue #13320 (May 2026, version 1.9.8c), the check-status tool reported the zapret service as NOT running while the WinDivert driver and the winws.exe bypass process were both RUNNING.
Community reports confirm the modes can diverge. In Issue #7490 (December 2025, closed), every interactive BAT flashed a console window and closed immediately on build 1.9.0b, while the reporter said versions 1.8.2 and older launched normally. The pinned community discussions for YouTube (#251) and Discord (#252) also contain reports where behavior with the service installed differed from a manual BAT run; those are anecdotal reports, not controlled comparisons.
How the two modes work, step by step
- Manual testing mode: run a strategy BAT file, check whether your target sites or apps work, then close the console window before testing the next strategy.
- Open service.bat and use its built-in tests (the guide refers to the Run tests menu option) to find a strategy number where checks pass.
- In service.bat, choose Remove service to clear any previous installation.
- Choose Install service and enter the strategy number that worked in testing.
- Use the check-status option to confirm the state of the zapret service, the WinDivert service and the winws.exe bypass process as three separate lines.
What is source-backed vs community-reported
- Source-backed (practical guide): the service.bat workflow of test, remove, install, and the warning to close a previous BAT before starting the next.
- Source-backed (practical guide): installing the service is the recommended way to persist a tested strategy.
- Current issue evidence: check-status output in Issue #13320 (2026-05-11, version 1.9.8c) showing the service NOT running while winws.exe was RUNNING.
- Community-reported: interactive BATs closing instantly on build 1.9.0b while 1.8.2 worked (Issue #7490, 2025-12-18).
- Community-reported: anecdotal service-versus-manual behavior differences in Discussions #251 and #252.
When the reported workaround may not apply
A strategy that works in a manual BAT window is not guaranteed to behave identically once installed as a service, and the reverse is also true. If the service fails but manual runs work, diagnose the service installation itself (old service leftovers, wrong strategy number at install time) instead of assuming the strategy is wrong.
Reports like Issue #7490 are tied to specific builds; behavior described for 1.9.0b or 1.8.2 may not match the current release. Treat any single discussion comment about service behavior as a data point for your own testing, not as a rule.