What the sources actually say

Flowseal Discussion #3797 is titled "[Solution] Internet does not turn on after PC reboot". The symptom described by participants is specific: with zapret starting automatically, after a reboot or power-on Windows reports an unidentified network, and the PC does not even appear in the router's device list — as if it was never assigned an IP address. Turning zapret off makes the connection come back immediately.

The discussion author shared modified BAT files — referred to in the thread as "internet fix" files, for example an ALT6-based fix marked v3.2 — prepared for zapret versions 1.8.1 and 1.8.2. Per the author's own description in the thread, these files are meant specifically for people whose internet does not connect while zapret is running at PC startup. The usage notes given there: place the file into the matching version's folder, remove any previously installed service first, and verify the result with the Check Status option in service.bat.

A second, independent resolution was posted by a participant: install zapret as a service, open Windows Services (Task Manager → Services → Open Services), find zapret, open Properties → Log On, select "This account", enter your Windows user account name, confirm it with Check Names, and enter the account password. With this change, zapret starts only after you sign in, so it no longer interferes with the initial network connection that happens at boot.

Participants in the thread placed the problem around zapret versions 1.8 and later, and one commenter suspected the router's DHCP server may stop answering, noting the conflict might not be caused by zapret alone. The klaymm practical guide links this discussion under the heading "Internet disappears after reboot", which is why the guide's preparation checklist — removing other bypass tools such as ByeDPI, GoodbyeDPI or Proxifier and using only the official build — is relevant context before assuming zapret itself is at fault.

The fix files and the service log-on change are community solutions from one discussion thread. They are not part of the official zapret documentation.

Step-by-step diagnostic flow

Following only what the discussion and the guide actually describe:

  1. Confirm the symptom matches: after a reboot, Windows shows an unidentified network or the PC is missing from the router's device list, and stopping zapret restores connectivity immediately.
  2. Remove leftover bypass tools and old zapret services first — the thread repeatedly advises deleting a previously installed service before applying any fix, and the guide's checklist asks for other bypass software to be disabled.
  3. If you use the discussion's fix files, copy the one matching your zapret version (1.8.1 or 1.8.2) into that version's folder, run it, then open service.bat and use Check Status to verify the bypass is actually running.
  4. Alternatively, apply the service log-on change described above so zapret starts only after Windows sign-in.
  5. Reboot and verify that the network comes up normally and that zapret still works afterwards.

What is source-backed vs community-reported

  • Community-reported (Discussion #3797): the unidentified-network symptom at boot, the version-specific fix BAT files, the service log-on workaround, and the observation that one fix slowed loading of some other sites.
  • Practical guide (klaymm): the guide links Discussion #3797 for this exact symptom and provides the preflight checklist (other bypass tools disabled, official build only, simple folder path).
  • Not in any source: generic Windows network resets. Neither the discussion nor the guide prescribes them for this symptom, so they are deliberately not included here.

When the reported workaround may not apply

The fix files were built for specific zapret versions (1.8.1, 1.8.2) and strategies; using them on another version is not covered by the source. One participant reported that after applying the fix, the internet survived reboots but some other sites and GitHub pages loaded very slowly or not at all until the fix was disabled. Another participant pointed out that a router-side DHCP failure can produce a similar picture without zapret being involved at all. If your network fails differently — for example Wi-Fi connects but sites do not open — this thread does not describe your case.

Source notes

Every factual claim in this article is grounded in the sources below. Community reports are attributed and are not official recommendations. Last verified: 2026-09-30.